Quick-Change System
Quick-Change System:
Allows for quick, easy change of tooling on your robot. The Quick-Change System utilizes a simple twist and lock mechanism that secures our dove tail mounting plates, and allows tooling to be slid out of place and a new one to be just as easily inserted. The Quick-Change System saves time and takes place of multiple mounting plates. The systems are sized according to the size and weight of the parts being pulled from the mold.
QC-SP
Description

Height (inches)

Width (inches)

Depth (inches)

Quick Change Assembly 4 2 1/2 1
Application: Specifically designed for use with Sprue and PartsPickers. 
Used in coordination with 28879 Dove Tail. Dove Tail slides into place and locked in by tightening the Quick Release handles.
QC-R100
Description

Height (inches)

Width (inches)

Depth (inches)

Quick Change Assembly 4 1/2 2 3/4 1
Application: Designed for smaller sized robots with small to medium sized End of Arm Tooling. Used in coordination with 29261 Dove Tail. Dove Tail slides into place and locked in by tightening the Quick Release handles. 
QC-R200
Description

Height (inches)

Width (inches)

Depth (inches)

Quick Change Assembly 3 3/4 5 1
Application: Designed for medium and large End of Arm Toolings. Used in coordination with 27635 Dove Tail. Dove Tail slides into place and locked in by tightening the Quick Release handels.
QC-R300
Description

Height (inches)

Width (inches)

Depth (inches)

Quick Change Assembly 3 3/4 6 1
Application: Designed for use with especially large and heavy End of Arm Toolings. Used in coordination with 27605 Dove Tail Dove Tail slides into place and locked in by tightening the Quick Release handels.
The Quick-Change System allows you to quickly and easily change End of Arm Toolings on your robot without having to remove a ton of mounting bolts. Once you have mounted the corresponding Dove Tail to the back of your EOAT’s, switching between toolings is an easy three step process. 
Step 1

The Dove Tail, (29261) is fixed to the back of the End of Arm Tooling. Loosen the Quick Release latches and begin to slide the Dove Tail into
place.

Step 2

Loosen the Quick Release latches merely half a turn further and the Dove Tail will slide into the assembly. The bottom is held by a fixed stop plate. 

Step 3

Turn the Quick Release latches until tight.  The End of Arm Tooling is now locked securely in place. 

820 Boston Turnpike Rd. Shrewsbury, MA 01545
Phone: 508-842-6500 Fax: 508-842-5941